Concrete Sealers

Clear Shield is a medium gloss, UV Resistant acrylic co-polymer concrete sealer intended for all types of concrete. Clear Shield offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Clear Shield provides superior adhesion to properly prepared concrete. Clear Shield can be considered an ultimate multi-use concrete sealer. Application can be rolled or sprayed. Contains 25% Solids.

Super Shield is a SUPER high gloss, UV Resistant acrylic, co-polymer concrete sealer intended for all types of concrete. Super Shield offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Super Shield provides superior adhesion to properly prepared concrete. Super Shield can be considered an ultimate multi-use concrete sealer. Application can be rolled or sprayed. Contains 30% solids.

Ever Shield is a high gloss, fast drying, non-yellowing, pure acrylic concrete lacquer-style sealer designed for decorative concrete. Ever Shield offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete.

Clear Shield Satin is a medium gloss, UV Resistant acrylic co-polymer concrete sealer intended for all types of concrete. Clear Shield Satin offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Clear Shield Satin provides superior adhesion to properly prepared concrete. Clear Shield Satin can be considered an ultimate multi-use concrete sealer. Application can be rolled or sprayed. Contains 19% Solids.

Deco Guard is recommended for use on new or existing Pool Decks, Stamped Concrete, Stenciled Concrete, Acid-Stained Concrete, Overlayed Concrete, Exposed Aggregate Concrete, Broom Finish Concrete, and Trowel Finish Concrete. Other uses may be acceptable. Deco Guard is a non-yellowing, low sheen, Siloxane Modified Methyl Methacrylate with a low viscosity for better penetration on concrete substrates. Deco Guard’s unique Siloxane Modified Methyl Methacrylate formulation provides superior water and salt resistance compared to standard sealers used to protect exterior concrete.

Aggreseal Supreme is a high gloss, UV resistant solvent based acrylic exposed aggregate sealer. Aggreseal Supreme offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Aggreseal Supreme Brown is intended for use on exposed pea gravel aggregate concrete. Gray tinted Aggreseal Supreme is intended for exposed limestone chip aggregate concrete. Aggreseal Supreme offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Aggreseal Supreme provides superior adhesion to properly prepared concrete. Applying Aggreseal Supreme to exposed aggregate will also help to eliminate loose pebbles and premature wear.

Repel Cure is recommended for use on new or existing unsealed Pool Decks, Exposed Aggregate Concrete, Broom Finish Concrete, & other unsealed porous concrete & masonry surfaces. Other uses may be acceptable. Repel Cure is a dual functioning chemical reactive curing compound and water repellent with a low viscosity for better penetration on concrete substrates. Repel Cure’s unique formulation provides superior water and salt resistance compared to standard sealers used to protect exterior concrete. Improved resistance to deicing road salts, salt-water pool systems, rain, sleet and snow are achieved with our advanced chemical reactive formula. Repel Cure also meets cure & seal specs ASTM C-309, Type 1, Class A & B, AASHTO Spec M-148, Type 1, Class A & B so it can be applied directly to freshly poured concrete after all surface water has dissipated.

Hold Out is a reactive, penetrating catalyzed potassium siliconate solution that fuses within porous substrates of concrete, brick, stone, and mortar to combat freeze/thaw damage, scaling and spalling, and limits penetration of stains and damaging impurities such as oil, gas, grease, and salt. Hold Out™ is breathable with minimal impact to traction coefficient. Hold Out creates a cross-linked insoluble methyl-silicone internal membrane that will wear away only if the substrate itself wears away below sealer penetration.

Aqua Cure 15-100 is a low odor, low VOC, non-yellowing, water-based product designed for curing and sealing applications. AQUA CURE 15-100 is a breathable coating that provides a satin or low gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes. AQUA CURE 15-100 is self-crosslinking, which provides better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance.

Enhancer Shield SB is an active solvent-based silicone water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. CLEAR application that enhances colored and stained concrete, decorative stones, pavers and cementitious overlays with no film build! ENHANCER SHIELD SB penetrates and chemically bonds deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. It leaves a true matte finish while protecting concrete cracking, spalling, staining and other damages caused by water intrusion. Enhancer shield will not change the feel of the surface and will not make the concrete slick.

Enhancer Shield WB is an active water-based silicone water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. CLEAR application that enhances colored and stained concrete, decorative stones, pavers and cementitious overlays with no film build! ENHANCER SHIELD WB penetrates and chemically bonds deep within the substrate to provide long lasting protection against deterioration, cracking or staining due to water conditions. It leaves a true matte finish that will not change the feel of the surface and will not make the concrete slick. Also, Enhancer shield WB has a low VOC that makes this a perfect product for occupied buildings.

Paver Shield is a high gloss, fast drying, non-yellowing, methyl methacrylate sealer specifically designed for pavers and decorative concrete. PAVER SHIELD offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete while leaving a desirable enhanced “Wet Look” appearance.

Paver Sheild WB is a low-medium gloss, non-yellowing water-based sealer specifically designed for pavers and decorative concrete. PAVER SHIELD WB offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete while leaving a desirable lightly enhanced natural appearance.

30 colors

Tint Packs can be added to solvent-based acrylic sealers to create a tinted semi-transparent look.